Is your house being invaded by Chipmunk? Get rid of them now!
Not only Chipmunk but you can keep Away Deer, Raccoon, Skunk, Rabbits & Feral Cats. Make Your Home, Garden, and Yard more Safe and Clean.
Are you tired of animals invading and destroying your home and vegetable garden?
Even threaten the safety of your pets. Our ultrasonic repellers are used intense ultrasonic signals to scare the dogs, cats, wild boars, mice, birds, and other animals away from your zone, house, garden, or yard. It has 5 different sensitivity modes that you can set according to your needs, different sensitivity can work effectively on different animals
The Motion Sensor detects moving objects accurately. Equipped with powerful two-color LED Flashing Lights and an optional Audible Alarm - LED flashing lights upgrade to 14 flashes (8 white bright & 6 red bright). Condenser cup makes it more effective to drive away from the most aggressive animals that may adapt and become immune to a certain sound frequency.
Portable & Easy to use
You can either push the animal repeller into the ground or hang it on the wall. Suitable for yards, patios, driveways, garages, attics, porches, boats, gardens, farms, ponds, etc. In addition, it is portable so you can take it camping to be away from stray dogs, stray cats, and pests.
Solar Powered & Waterproof
With a solar panel on top, the device can be directly charged by the sun. Featuring a lithium battery that is much better than old-fashioned 3*AA NiMH batteries, the 1pc 3.7V 2000mAh Lithium rechargeable battery (included) performs much better on lifetime, charging efficiency, and power supply stability.
Humane & Eco-Friendly
No traps, no dead animals, and no chemicals. A variable frequency and optional LED flashing and an audible alarm make this device ideal for driving out or repelling any animals.
Large area coverage
Protect Your Property with An Area Up to 1,615 Sq.ft— The most advanced PIR sensor (Sensor angel is 120 degrees) can detect animal's motion within a distance of up to 33 ft.
Before using the battery for the first time, it is recommended that you charge it via USB cord
Sound waves usually don't produce an immediate effect, the full deterrent effect may take 10-15 days.
The device is IP66 protected, but never soaks the product in water.
When functions such as emitting sound waves, flashing lights, or audible alarm fail after a period of time, the battery may be depleted. Recharge the battery with a USB cord to fully restore power. If the problem still exists, please kindly contact our support team for service.
INSTALLATION AND SETTINGS
1) Remove the transparent protective coating from the top of the solar panel to ensure it can absorb sunlight effectively.
2) Do not cover up the PIR sensor; place the solar panel on top in a place where it can receive as much sunlight as possible.
3) Install the device in the direction from which animals approach.
4) The installation height is determined by the size of the animals. A bigger animal needs a higher installation height. For some big size animals, we recommend you hang the device on a wall/fence.
5) Turn the "Audible Alarm" knob to turn on/off beeps and adjust volume.
6) Turn on/off sound waves and LED flashing with the "Frequency" knob, and choose different frequency bands for different animals.
- 1：13.5 kHz-19.5 kHz, repels animals such as mice, rats, dogs, foxes, martens etc.
- 2：19.5 kHz-24.5 kHz, repel animals such as cats, raccoons, badgers, skunks etc.
- 3：24.5 kHz-45.5 kHz, repel animals such as bats, birds, rodents etc.
- 4：Strong flashing lights to repel animals such as raccoons, boar, marten, etc.
- 5：Repel all animals and birds with variable frequency and strong LED flashing.
- Animal Repeller (x1)
- Micro USB cord (x1)
- Quick Guide (x1)